Performance and safety

The Mupid® mini gel system has continuously improved throughout the years, always incorporating new technical innovations in terms of conveniency or safety, to best fit your needs. The electronic components and the materials of Mupid®-One have been modified and improved to reach the gold standard in electrophoresis. These improvements lead to higher, safer and longer term usage. The Mupid®-One is CE marked.

CE marking
Intelligent power supply
Heat resistant materials
Multichannel pipette compatible
Safety lid with switch slits
Compatible with gel casting sets of previous Mupid® versions
Gel maker set included

Name	Quantity	Reference	EUR
Mupid®-One electrophoresis system - complete apparatus	1	MU-0041	597.00
Large Tray for Mupid®-One	2	MU-0041-LT	42.80
Small Tray for Mupid®-One	4	MU-0041-ST	42.80
Gel Maker set for Mupid®-One	2 ST, 1 LT, 4 combs, 1 stand	MU-0041-MS	160.60
Standard comb for Mupid®-One	2	MU-0041-SC	32.20
Gel casting stand, for Mupid®-One	1	MU-0041-SD	64.00
Tank & Lid for Mupid®-One	1	MU-0041-TK	294.00
Power Supply Mupid®-One	1	MU-0041-PS	384.50

Delivery times

2 working days

Shipping conditions

Room temperature

Storage conditions

Room temperature

Intelligent Power Supply

Timer function: The timer can be user-set from 1 to 99 minutes (includes alarm). The continuous and pause modes are available.
Voltage variation range: 7 kinds of output voltages are available: 18 - 25 - 35 - 50 - 70 - 100 - 135 V (constant) . Peak volatge is constant (140 V) and output level changes through pulse control.
Very simple operation: Operations are very simple, pushing 'Timer", "Voltage Selector", "Run/Pause/Stop" buttons
Current regulation: Rather than performing a forced shutdown when peak current is exceeded the Mupid®-One controls the voltage so that it can maintain the current at or below peak value for continuous operation.
Storage of set values: Set voltage and timer values used in the last experiment are automatically retained in memory (supports pausing).
Global Input Voltage Compatibility: Variable input voltage of 100 to 240 V supports used virtually anywhere in the world. Individual country power supply cable may differ.

Safe

The lid is made of a robsut material and has been designed so that it can be removed with only one hand.
The water guide will prevent water from directly dripping while opening the cover and will allow good drainage when washing.
The cover is directly connected to the power supply; the main power cannot be operated without the lid.

Convenient to use

With this very convenient electrophoresis system you will be able to make variable sizes of gel. The combs can be changed very easily and the tank can be washed easily thanks to the removable power supply.
Up to 104 samples (96 samples + 8 markers) can be easily loaded with a multichannel pipette in 130 x 122 mm gel.
Compatible with gel casting set of previous Mupid®. Heat resistant gel casting set.
> Gel solution up to 100 can be pourd into the Gel Tray. This makes gel casting time shorter. > Clean up the used Gel Tray easily by boiling water.
Buffer Drains: Buffer drains are at two corners so that buffer can drain away easily.
Washable: The electrophoresis cell can be separated from the power supply and is washable.

Compact

Tank size: 183 x 56 x 162 mm
Lid size: 197 x 38 x 170 mm
Power supply size: 170 x 62 x 75 mm
Only 270 to 320 ml of buffer and 50 to 120 ml of agarose will be required to run a gel.

Accessories

All the accessories are included with the electrophoresis system: gel maker set (3 trays - 4 combs - stand)

Heat resistant gel casting set
> Gel solution up to 100 can be pourd into the Gel Tray. This makes gel casting time shorter. > Clean up the used Gel Tray easily by boiling water.
Multichannel-pipette compatible Comb theeth pitch matches the multichannel-pipette and multi*-sample applicable.
* The large gel tray can make up to 4 rowes of wells (running length of 2.7 cm), so can handle up to 104 samples (26 x 4 = 104).