Print

Custom Mouse Monoclonal Programme

Mab development - customised and application specific




Just send us


  • Your antigen preparation: 250 µg per mouse (250-500 µg/ml in PBS) or a concentrated solution of solubilized antigen.

  • Your ELISA protocol, antigen and corresponding polyclonal antibodies sufficient for the screening and determination of the antibody titer (minimum 60 plates). This test must be validated before starting the experiment. If you do not have an ELISA protocol yet, Eurogentec can develop one for you. For special ELISA protocol, please contact us to request a price offer.

  • If the animal(s) must be immunized intravenously instead of via intracutaneous injection, we will need a document stating that the antigen is not harmful.





Description Reference EUR
Monoclonal antibody • Phase I • Immunisation • per mouse (minimum 4 mice) AS-ACMC-IM 412.00
Monoclonal antibody • Phase II • Fusion • Eight 96 well plates AS-ACMC-FU08 4131.00
Monoclonal antibody • Phase III • Analysis • 8 Plate fusion : screening AS-ACMC-AN08S 3244.00
Monoclonal antibody • Phase IV • Cloning and isotyping • First hybridoma AS-ACMC-CIFH 2152.00

Additional Optional Services
Monoclonal antibody • Phase I • Immunisation • per additional month and per mouse (minimum 4 mice) AS-ACMC-IMADDM 200.00
Monoclonal antibody • Phase I • Immunisation • Animal housing after mouse selection price / month AS-ACMC-HOUS 84.00
Monoclonal antibody • Phase II • Fusion • Twelve 96 well plates AS-ACMC-FU12 8262.00
Monoclonal antibody • Phase II • Fusion • Twenty 96 well plates AS-ACMC-FU20 13770.00
Monoclonal antibody • Phase III • Analysis • 8 Plate fusion : additional screening of the positive wells. Per cross-reactant AS-ACMC-AN08A 649.00
Monoclonal antibody • Phase III • Analysis • 12 Plate fusion : screening AS-ACMC-AN12S 6489.00
Monoclonal antibody • Phase III • Analysis • 12 Plate fusion : additional screening of the positive wells. Per cross-reactant AS-ACMC-AN12A 1298.00
Monoclonal antibody • Phase III • Analysis • 20 Plate fusion : screening AS-ACMC-AN20S 10815.00
Monoclonal antibody • Phase III • Analysis • 20 Plate fusion : additional screening of the positive wells. Per cross-reactant AS-ACMC-AN20A 2163.00
Monoclonal antibody • Phase III • Analysis • Cell line storage (per year and cell line) AS-ACMC-STOCK 135.00
Monoclonal antibody • Phase III • Analysis • Thawing - freezing (per clone) AS-ACMC-DEFREE 394.00
Monoclonal antibody • Phase IV • Cloning and isotyping • Cloning and isotyping of each additional hybridoma AS-ACMC-CIAH 2152.00
Spleen removal and preparation for fusion AS-ACMC-SPLPREP 546.00
Additional injection in monoclonal antibody programmes AS-ACMC-ADDINJ 17.00
Additional bleed in monoclonal antibody programmes AS-ACMC-ADDBLD 27.00
Additional antigen/ELISA test in monoclonal antibody programmes AS-ACMC-ADDELI 286.00


Shipping conditions

   Dry ice

Storage conditions

   -80C

Phase I: Immunization


  • A minimum of four mice (6-8 weeks old) is used for immunization. Preimmune serum is taken on day 0.
  • A total of four injections are administered (50 µg antigen per animal per injection). The first injection on day 0 with equal parts (v/v) of complete Freund's adjuvant and antigen. The following three boosts are carried out with equal parts (v/v) incomplete Freund's adjuvant and antigen on days 21 and 42 with an additional final boost prior to fusion.
  • Selection of the best responding mouse 10 days after the last injection using the client's ELISA test.
If the antibody titer is too low after three booster injections, you may request additional injections. If the ELISA report remains negative, the immunization should be terminated because the probability of success is too low.
If the antigen has a low immunogenicity, it can be coupled to an appropriate protein carrier.
Duration of this standard program: 11 weeks. The above description is the Eurogentec standard protocol. However, a personalized procedure may be designed and adapted to your needs.

Phase II: Fusion


The splenic lymphocytes of the best responding animal will be fused with the cell line Sp2/O-Ag-14 using PEG (polyethylene glycol), and the resulting hybridomas will be seeded in eight 96-well plates in HAT medium. If any fusion cocktail remains, it will be stored in liquid nitrogen.
Duration: 2-3 weeks

Phase III: Screening and amplification of hybridomas


  • IgG producing hybridomas will be screened against the target antigen and two vials of every positive hybridoma stored in liquid nitrogen
  • The positive colonies are expanded and tested again for antibody production with the antigen used for immunization
  • At this point, positive colonies can also be screened against additional antigen for cross-reactivity or against a region of the antigen of interest
  • Other screening tests can be used such as Western blots or immunofluorescence. Please contact us for a price offer
  • In addition, 5-10 ml supernatant of the 20 most positive hybridomas will be sent to you for screening confirmation and additional tests. This will ensure that the positive ELISA results identify antibodies useful for your purpose
Duration: 5-7 weeks

Phase IV: Cloning and isotyping

  • The specific hybridomas you have selected at the end of Phase III will be cloned by limit dilution. The assay can be carried out as in Phase III (screening for the antigen used for immunization and additional screening of positive clones with additional antigens). After cloning, three vials of every cloned hybridoma are stored in liquid nitrogen. We send you 15-20 ml of every hybridoma supernatant together with the frozen hybridomas.
  • Subsequently, the subclass of every monoclonal antibody will be determined by ELISA testing.
  • Duration: 4 weeks



Please provide all of the following information so that we may begin to process your order


 
    • Peptide sequence for anti-peptide programmes
• Purchase order number from your institute
• Product references and prices
• Other important production information

 
  Delivery information
• Name
• Shipping Address
• Telephone
• Email
Invoicing information
• Name
• Shipping Address
• Telephone
• Email
 



  • Online
    You can place your order online. Login to access our web ordering interface.
  • By fax : +32 4 264 07 88
  • By mail
    Eurogentec S.A.
    LIEGE Science Park
    Rue du Bois Saint Jean 5
    4102 Seraing
    BELGIUM

If you still have questions with ordering please contact our Customer Support : +32 4 372 76 65.


To receive relevant information on our products, you should first select your country :
Country selection page