qPCR 96-well plates with the following features:
- Low profile
- Optical quality plastic
- Frosted for improved signal-to-noise ratio when compared to natural plates
Our qPCR 96-well plate sub-skirted, low profile, frosted are made of a special polypropylene of optical quality and of medical grade and virgin quality.
The plates will allow you to generate more accurate and reproducible results, increased signal intensities, also when working with small volumes. Concerning the closing of the plate we propose either to use optical flat 8-cap strips or seals. If optical seals are used with these plates for the use of ABI instruments, it is recommended to use a compression pad.
- Virgin optical quality polypropylene blend, optimized for qPCR, which causes no background fluorescence.
- Extreme uniformity of wall thickness: thin wall at the bottom for optimal heat transfer, thicker wall at the top to minimize evaporation.
- Perfectly flat, thin-walled and rigid, but still flexible structure, with extreme uniformity. Avoid edge artifacts.
- Their very rigid stabilized frame will help you Avoid robotic handling problems due to plate warping.
- Extensive visual and physical quality controls ensuring the highest consistency in quality of the products.
- Frosted plates can significantly increase signal-to-noise ratio when compared to natural plates. Thus, lower levels of fluorescence are detectable.
- The antistatic properties of our plastics minimize reagents adsorption to the tube walls, thus leading to higher yields and allowing the use of small reaction volumes.
- New super-tight closure and sealing properties reduce evaporation, leading to more reproducible results.
These plates must be preferencially used on ABI - Prism® SDS 7500 FAST, ABI - Prism® SDS 7900/7900 HT FAST, ABI Step One™Plus, ABI- ViiA7™ FAST and Life technologies - QuantStudio™ FAST, ABI9800 Fast Thermal Cycler, Stratagene/Agilent - AriaMX but are also compatible on BioRad- Chromo 4™ and BioRad - DNA Engine Opticon™ 2
If you are using an ABI cycler with Regular block (non-FAST), please go for high profile plates ( RT-PL96-AB).